Mountain GPS Instrument For Land Survey S2 GPS Land Survey Equipment
Product Parameters Of Model S2 GPS Land Survey Equipment :
| Machine model | | | | S2 |
| Normal area measurement | | | | √ |
| Fixed area measurement | | | | √ |
| Machine load area measurement | | | | √ |
| Slope area measurement | | | | √ |
| Intell. Slope measurement | | | | √ |
| Fixed point measurement | | | | √ |
| L/W area measurement | | | | √ |
| Mountain area measurement | | | | √ |
| Normal distance measurement | | | | √ |
| Multipoint distance measurement | | | | √ |
| Slope distance measurement | | | | √ |
| Altitude display | | | | √ |
| Altitude measurement | | | | √ |
| Track display | | | | √ |
| Real-time track | | | | √ |
| Mu setting | | | | √ |
| Unit setting | | | | √ |
| Time display | | | | √ |
| Data statistics | | | | √ |
| Historical record | | | | √ |
| Data export | | | | √ |
| Car charger | | | | √ |
| Lighting /Currency detection | | | | √ |
| Voice broadcast | | | | √ |
| Protection level | | | | IP66 |
Machine Operation Methods:
HDOP setting of GPS land meter:
①On the home page of boot,press the【Settings】button to enter the settings interface；
②Press the▲▼button move to “HDOP setting”；
③Press the【Enter】button to enter；
④Press the▲▼button to adjustment HDOP numerical value.
⑤Press the【Enter】button to save and exit.
Note: Measurements can only be made if the value is lower than or equal to the set value.
Elevation calibration of GPS land meter:
①On the home page of boot,press the【Settings】button to enter the settings interface；
②Press the▲▼button to move to“Elevation calibration”；
③Press the【Enter】button to enter；
④Press the▲▼button to adjustment the number,and press the【Enter】button to complete the calibration.
⑤Press the【Enter】button to save and exit.
Statistics record of GPS land meter:
①On the home page of boot,press the【Settings】button to enter the settings interface；
②Press the▲▼button move to“Statistics record”；
③Press the【Enter】button to enter；
④Press the▲▼button to move,select data statistics or measurement records；
⑤Press the【Enter】button to enter,and view detailed records information.
⑥Press the "power" button to return.
Fixed width of GPS land meter:
①At the Fixed width in parameter setting, press the ▲▼button to set the width.
②After setting is completed,press the "power" button to return main interface.
③Press the▲▼button switch function to “Fixed width”in the main interface；press the【Start】button to measure in starting point；Press【Stop】button to pause measurement when measuring to the bottom line and view data；If the measurement is not completed, press the【Start】button again to continue the measurement. If the measurement is completed,press "power" button to save the data.
Product Tags:
|
|
Mountain GPS Instrument For Land Survey S2 GPS Land Survey Equipment Images
|
